AdvantageBond

SOLID SURFACE SEAM ADHESIVE

AdvantageBond is a Methacrylate Adhesive designed to provide outstanding bonding performance to all solid surface materials. 

AdvantageBond quickly cures in room temperature and can be routed in 30 minutes.

AdvantageBond is available in 22 standard colors for your entire solid surface seaming needs.

AdvantageBond is sold in a 250ml cartridge and needs to be dispensed into the mixing tip at a 10:1 ratio.

AdvantageBond is simple to use and store.

When using a new tube simply squirt out some material without the mixing tip attached to ensure that both the adhesive and catalyst are flowing.  Next, attach the mixing tip and begin seaming.

When you are finished using the adhesive leave the mixing tip on and store in an upright position. Leaving the tip on will allow the adhesive to set up in the tip but not cartridge or feed chamber.  When you are ready to use the tube of adhesive again, take off the tip, check the adhesive and catalyst flow and apply new tip.

AdvantageBond should be stored in cool, dry place with temperatures between 50 – 70 degrees Fahrenheit.  Storing it in a materials refrigerator can prolong the adhesives self-life. Do not freeze.